2 product ISO control

[Clive]

So I want to convert an accord front hopper to ISO control running on x30 or Fedit profi terminal

There will be x2 metering units up front regulating x2 different products at x2 different rates

Can I get a ISO controller that will do both units or do you need x2 units

The second unit will probably be a Stocks venturi unit which can be bought with iso (RDS) I think


anyone know much about this - I know LH do a system ( I think its RDS for the accord hopper) but have also been told Dickey John do one that's much cheaper ?

@Robt - I know its not what you do these days but do you have experience that can help ? Rich R proving to be a hard man to pin down on it all and I want to get on with it

 

[Robt]

Sorry Clive, i cant help.

 

[towns]

Hi Clive,

Yes, the ISOBUS Artemis would do this. You can have up to 4 motors, either all running independent rates (different products) or linked (same product but left and right) or seed left/right fert left/right (4 motors) or all 4 linked to be similar in principle to a 4 section sprayer (OL, IL, IR, OR) all running a single rate. They will also each talk to task controller so you can run independent VRA maps and independent section/channel control on/off.

Yes, if you have the Stocks unit with the iCon ECU on then it will plug straight in to the Artemis and you then also get the electric fan/spinner control (but I see you'll just feed in to venturi so it will just run as an additional channel). The stocks would count as one of those motor channels, so you could have 2 accord metering units + a stocks without issues.

Just shout if you need more info or we can throw together a quick video to show you it running.

 

[LH Agro]

Hi Clive,

We've sent information on email together with an indication of pricing.