22mm long ratchet spanner

[mo!]

I need a long pattern 22mm ratchet spanner for changing the depth wheels on my Sulky drill. A Draper Hi-Torq would be ideal but everywhere is either out of stock or silly money.

Any other makes or somewhere with stock?

 

[Lincs Lass]

https://www.ebay.co.uk/itm/Facom-6m...hash=item2a7e43b5e5:m:mTPpsu7RAxnBFTZhmL8HHXg

 

[Lincs Lass]

https://www.ebay.co.uk/itm/Draper-H...160299&hash=item4650689a9a:g:1xwAAOSwnNBXb4K6

 

[Lincs Lass]

https://www.ebay.co.uk/itm/Ratchet-...830463?hash=item2f195a97ff:g:5-kAAOSw7aBVCMEu

 

[Lincs Lass]

https://www.ebay.co.uk/itm/RCW22-Se...310161&hash=item2391f69d10:g:NqQAAOSwnCFZ~PIa

 

[mo!]

As much as I appreciate your effort @Lincs Lass, they are all standard length. I need long ones, for reach and torque.

 

[Lincs Lass]

How long is long

 

[Lincs Lass]

This long enough
https://www.ffx.co.uk/tools/product...Pattern-Ratchet-Ring-Spanners#FullDescription

 

[MrNoo]

As much as I appreciate your effort @Lincs Lass, they are all standard length. I need long ones, for reach and torque.

Cant you just cut and weld an extension on to perfectly suit the job in hand??

 

[mo!]

How long is long

The Draper one is 435mm.

https://www.drapertools.com/product...-Metric-Long-Pattern-Ratcheting-Ring-Spanners

 

[tinman]

I need a long pattern 22mm ratchet spanner for changing the depth wheels on my Sulky drill. A Draper Hi-Torq would be ideal but everywhere is either out of stock or silly money.

Any other makes or somewhere with stock?

435mm long is pretty ambitious for a 22mm ratchet spanner from a fashion brand never mind a draper one even tho its a expert version but maybe that's just me.
There could be a reason it's out of stock or silly money (normally means out of stock) when you look for one
Would a 1/2 breaker bar and a socket on it do?
You could get a scaffolders ratchet spanner and weld a bit of a pipe onto the podger end while not being too greedy at the same time.

 

[mo!]

435mm long is pretty ambitious for a 22mm ratchet spanner from a fashion brand never mind a draper one even tho its a expert version but maybe that's just me.
There could be a reason it's out of stock or silly money (normally means out of stock) when you look for one
Would a 1/2 breaker bar and a socket on it do?
You could get a scaffolders ratchet spanner and weld a bit of a pipe onto the podger end while not being too greedy at the same time.

I've been using a breaker bar today but there isn't really enough room. I'll have to wait until they come back in stock.

 

[tinman]

I've been using a breaker bar today but there isn't really enough room. I'll have to wait until they come back in stock.

Aah, your tied to too long as well I see.
The scaffolders spanner might suit if you have a look at one.

 

[mayos]

https://www.amazon.co.uk/dp/B000NC0...=9045214&hvtargid=pla-426004108692&th=1&psc=1

cut the open end off and attach (weld/birdsh! t)a bit of pipe to give you the right length?

might break but you haven't lost much...

 

[mayos]

or this @ £12 and apparently in stock...
http://draper.thetoolstoredirect.co...-Metric-Long-Pattern-Ratcheting-Ring-Spanners

 

[Renaultman]

As much as I appreciate your effort @Lincs Lass, they are all standard length. I need long ones, for reach and torque.

I bought some long standard ring spanners and a 22mm britool expert ratchet one off amazon. similar to these, think they were Bergen.
They've been brilliant to date.

 

[mo!]

or this @ £12 and apparently in stock...
http://draper.thetoolstoredirect.co...-Metric-Long-Pattern-Ratcheting-Ring-Spanners

Perfect!

 

[Highland Mule]

or this @ £12 and apparently in stock...
http://draper.thetoolstoredirect.co...-Metric-Long-Pattern-Ratcheting-Ring-Spanners

8528mm = eight and a half meters - that is seriously long! Not sure I could transport that around as my longest trailer is only 18' long

 

[joe soapy]

have seen a serviceable ratchet made from a rear bicycle sprocket on utube

 

[Bury the Trash]

As much as I appreciate your effort @Lincs Lass, they are all standard length. I need long ones, for reach and torque.

weld on a suitable bit of steel as an exstension.