3 point linkage controls

Crex

Member
Location
Innse Gall, Alba
New to me tractor, first with electronic linkage control. I've no idea what I'm doing, can't get linkage to drop, I move the big knob on the left and they move up and down over about 20cm. Help! You can maybe tell I'm not a machinery man.
20170608_202628.jpg
 

Lincs Lass

Member
Location
north lincs
Top dial is drop speed,,plough-fert is draft -position mixer,big one below is sensetivity,,other big one with red switch is main lift /lower,,dont know what the other small one is ,,what tractor
 

KB6930

Member
Location
Borders
Top dial is drop speed,,plough-fert is draft -position mixer,big one below is sensetivity,,other big one with red switch is main lift /lower,,dont know what the other small one is ,,what tractor
Big one without the red switch will be depth not sensitivity surely?
 

KB6930

Member
Location
Borders
Yes. Picture was meant to be the other way around.
If it's screwed all the way to the left and the other small dial up and right is set where it is I'd think if you used the main switch it should go all the way up or down? That's how most of them work then when the main switch is in down position if you turn the big dial it will alter how far down the arms go but I could be wrong.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,292
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top