3095 problem

Discussion in 'Classic Machinery' started by seedman stains, Oct 9, 2018.

  1. seedman stains

    Location:
    lost in france
    My 3095 has started to slaken off the bolts holding the wheel centre onto the rim,any cure new bolts all round?
     
  2. mo!

    mo! Member

    Location:
    York
    Or weld the nuts on.
     
  3. New nuts and bolts.









    And a long piece of pipe.
     
  4. Mur Huwcun

    Mur Huwcun Member

    Location:
    North West Wales
    Good chance they’re not actually slackening but stretching or the mating surfaces are not clean enough. Try them with a torque wrench to correct torque but ultimately it’s new bolts time. Is it doing heavy draft work or dump trailer type work?
     
    Last edited: Oct 9, 2018
  5. seedman stains

    Location:
    lost in france
    The tyres are 540 but no real draft work,a couple hundred hrs per year, age related?
     
  6. J428TGS

    J428TGS Member

    my ones slacken too, to the point of striping the threads i just replaced them with new bolts. it seams a fairly fine thread on my old ones
     

Share This Page