3pt linkage for forklift

[quattro]

I thought it would be handy to have a 3pt linkage attachment for the forklift to move and store machinery more efficiently if you don’t have a massive shed. Two of my sheds are not wide enough to turn around with any tractor, so a forklift would reduce the ammount of equipment left outside, exposed to the elements..
I found this on the web:

https://www.wifo.nl/en/products/attachments/other-forklift-attachments/tool-carrier-for-3-point-hitch-equipment

Has anyone used or built something like this?

I built this one

 

[glasshouse]

I thought it would be handy to have a 3pt linkage attachment for the forklift to move and store machinery more efficiently if you don’t have a massive shed. Two of my sheds are not wide enough to turn around with any tractor, so a forklift would reduce the ammount of equipment left outside, exposed to the elements..
I found this on the web:

https://www.wifo.nl/en/products/attachments/other-forklift-attachments/tool-carrier-for-3-point-hitch-equipment

Has anyone used or built something like this?

Are u using a forklift or telescopic?
A steiger qikhitch is best if you have a backplate

 

[Hendryk]

Are u using a forklift or telescopic?
A steiger qikhitch is best if you have a backplate

Wanted to get a forklift specifically for that. And as soon as you have one it opens the door for 100 more usecases

 

[glasshouse]

Wanted to get a forklift specifically for that. And as soon as you have one it opens the door for 100 more usecases

Better with a

Wanted to get a forklift specifically for that. And as soon as you have one it opens the door for 100 more usecases

masted?

 

[Little squeak]

I put my machinery on pallets to move them round, other stuff like balers can be towed if you make a round hole in the end of one fork to attach it to. I do sometimes have to "make" a bigger or odd sized pallet but I'm sure it would be a cheaper and easier option too.