60x40 frame

[Neddy flanders]

£2900 for this 60x40x16 frame on ebay
10x6 uprights
7x4 rafters
3x3 tie bars between eaves
Is that right?? CE accreditation but no diagonal bracings?

Any good for grain to 2.4 m high?

 

[speedy]

Looked good to me but I contacted him back in the summer and was quote two weeks lead time & £300 delivery so confirmed an order and struggled to get a reply on the mob no afterwards then had a call from him 8 weeks later wanting to know if I still wanted to go ahead, so don't bank on customer service

 

[Forever Fendt]

£2900 for this 60x40x16 frame on ebay
10x6 uprights
7x4 rafters
3x3 tie bars between eaves
Is that right?? CE accreditation but no diagonal bracings?

Any good for grain to 2.4 m high?

does that come with any purlins?

 

[speedy]

no perlins

 

[Forever Fendt]

does that come with any purlins?

any good for grain ? No roof bracings ,no side brace ,rafters to small ,no cap plate on top of stansion ,apex and eaves haunch way to small eaves should be 10% of span measured from the middle of the stansion top haunch should be twice the depth of section does not look enough bolts in connections no eaves beam to take bottom of roof sheet and vertical cladding and it bolted to slab not on proper holding down bolts ,so all in all not that cheap

 

[Pan mixer]

Too short for a grainstore too.

 

[MD @Minshall Buildings]

Happy to provide a quote for a quality designed shed [email protected]
01630 657647

 

[SimonB]

We at Graham Heath Construction would be more than happy to quote for a building if required please contact me on 01270 781158 Ext 1018 or email your details to [email protected].

Kind Regards

Brett Harris
Technical Estimator

 

[Blackleg]

Happy to provide a quote for a quality designed shed [email protected]
01630 657647

We at Graham Heath Construction would be more than happy to quote for a building if required please contact me on 01270 781158 Ext 1018 or email your details to [email protected].

Kind Regards

Brett Harris
Technical Estimator

Shed builders, Neddy flanders asked.........

£2900 for this 60x40x16 frame on ebay
10x6 uprights
7x4 rafters
3x3 tie bars between eaves
Is that right?? CE accreditation but no diagonal bracings?

Any good for grain to 2.4 m high?

Nobody's in a better position to answer than you two, so rather than the usual "happy to quote if you get in touch" post.

Is that specification right?

Thanks in advance

 

[Forever Fendt]

Shed builders, Neddy flanders asked.........



Nobody's in a better position to answer than you two, so rather than the usual "happy to quote if you get in touch" post.

Is that specification right?

Thanks in advance

most ask for advice or a opinion and only get offered a quote

 

[MD @Minshall Buildings]

most ask for advice or a opinion and only get offered a quote

Very difficult to offer advise on such basic information that's why I always suggest a quote so a fair comparison can be made.
If ebay shed is indeed CE accredited there should be proof of design available from supplier, which may give reassurance?
We do not design and fabricate buildings to fit a price point rather to fit the use of the building in its location within the UK ( wind loadings etc.).

"Quality remains long after price is forgotten !"