7530 engine rebuild and improvements :-)

tinman

Member
Location
Ulster
That JD NR on the gasket is interesting.
i looked it up in the jd parts portal but it dosent come up as a part used, its about the only way of reverse searching so im only going on what the putter said.
it looks like a jd number for sure but it seems its ahead of its time possibly.
 

Tom6830

Member
I know this is an old thread but I’m currently rebuilding my jd 6830. Due to a dropped valve. Do you think it would be worth installing the pre rad for the charge cooler like you’ve done
 

Timbo

Member
Location
Gods County
I know this is an old thread but I’m currently rebuilding my jd 6830. Due to a dropped valve. Do you think it would be worth installing the pre rad for the charge cooler like you’ve done

It would be much more worthwhile to have the EGR delete in both hardware and software which drops coolant temps 5 degrees and charge temps by 15c.

It only becomes desirable on the 75 which runs more boost pressure than the smaller models.
 
Where have you been @Rusty#1 ? Hope everything is good.

I’m still here just not as often! A little girl/family life now occupys most my spare time :love:

So I downscaled the contracting and do more haulage than anything now walking floor/low loader and curtain side,
still have 7710/cutter & your topper still going strong :)

Also had 2 and a half years with 2 bulldozers stockpiling woodchip/sawdust in a local factory which has now just come to a end,

6E32F913-E26F-49F1-AA17-5DA9B661EA8E.jpeg

AEDEA2D5-F3E3-4895-A5DE-6217118E8547.jpeg

882922EB-73CD-4CA5-A6AD-CA634AE81737.jpeg


I know this is an old thread but I’m currently rebuilding my jd 6830. Due to a dropped valve. Do you think it would be worth installing the pre rad for the charge cooler like you’ve done

Up to you Tom I did it and always thought it worked well would keep pretty reasonable temps even on 6m Power Harrow/press, and too my knowledge is still going strong now
 

Blue.

Member
Livestock Farmer
I’m still here just not as often! A little girl/family life now occupys most my spare time :love:

So I downscaled the contracting and do more haulage than anything now walking floor/low loader and curtain side,
still have 7710/cutter & your topper still going strong :)

Also had 2 and a half years with 2 bulldozers stockpiling woodchip/sawdust in a local factory which has now just come to a end,

View attachment 814008
View attachment 813998
View attachment 814000



Up to you Tom I did it and always thought it worked well would keep pretty reasonable temps even on 6m Power Harrow/press, and too my knowledge is still going strong now

Your dozers?
 
D6 ?

What year and hours?

Track condition?

D6R XL series II
2004
20k hours
Track chains 100% good done about 300hours since new, 80% good rollers/idlers and 50%pads
Coal U blade for bulk pushing

As with anything I own it’s been serviced and loved since we bought it wanted for nothing

Runs and sounds mint will push a house down all day,

2FCD8BFD-84EE-4E09-87EB-BBCB8236514E.jpeg
 
Pleased to hear the update and your doing ok !
What was all the woodchip/dust for and why the end, retender? Must be a huge fire risk in that heap?

Woodchip is in local chipboard/MDF factory, on a massive scale, and it’s ended because they’ve built storage silos so wagons tip and it gets conveyed into the silo then straight into factory.....or at least that’s the theory, as for fire it’s used that quick generally it doesn’t seem a issue, I believe there have been problems in the past but not really in the 10 years I’ve been in and out of there, was essential to keep the dozers well blown off every hour if pushing dusty recycled chip, not so bad in virgin chip or sawdust, I have a transit service van with built in hydrovayne ex gas board really good tool for the job
 

Blue.

Member
Livestock Farmer
D6R XL series II
2004
20k hours
Track chains 100% good done about 300hours since new, 80% good rollers/idlers and 50%pads
Coal U blade for bulk pushing

As with anything I own it’s been serviced and loved since we bought it wanted for nothing

Runs and sounds mint will push a house down all day,

View attachment 814204

Looks well,shame it’s not lgp.:(
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.0%
  • Up to 25%

    Votes: 66 35.1%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,290
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top