Yeah we have tested some building 250m long by about 100m wide over near PeterboroughPermeability test rig? Looks like it would create enough pressure to blow the f*cking roof off most buildings
anybody on a decent FIT rate would be quids in with that thingyou could use that to turn your windmill fairish
Power the farm at the same time?Wouldn't that be a bit much for your average air tunnel and drying floor?
Man knows his fans. Yes the pressure drop across the system can stall the fan. there is a trade off. Fans like an orchard blower achieve high pressure but low volume. That said if correctly ducted /distributed this would still deliver a huge volume of air.You need to be a bit careful as there are fans and fans, some will build pressure and some will give lots of wind.
You certainly need pressure to pump air through grain, not a lot but some
it may actually say on the plate something about water gauge and volume.
Perhaps @grainboy may be able to advise more, as I may be talking the proverbial