8ft bucket pin and cone

8ft cherry bucket on pin and cone brackets needs new blade £300 for the bucket I have a blade to fit that cost me £300 aswell
 

Attachments

  • 939DB360-61C8-4D9F-A787-27F4E96D56D3.jpeg
    939DB360-61C8-4D9F-A787-27F4E96D56D3.jpeg
    519.2 KB · Views: 0
  • 5D303165-9573-4EBD-B792-A46A997A5302.jpeg
    5D303165-9573-4EBD-B792-A46A997A5302.jpeg
    423.1 KB · Views: 0
  • D193782C-E757-4FA5-A011-69FAA15B5CD1.jpeg
    D193782C-E757-4FA5-A011-69FAA15B5CD1.jpeg
    352.9 KB · Views: 0
  • 0431B67F-E9F5-4201-8D56-04FE11C56F97.jpeg
    0431B67F-E9F5-4201-8D56-04FE11C56F97.jpeg
    485.4 KB · Views: 0
  • 22428A73-41A6-4424-8EE3-8E2D14C18AED.jpeg
    22428A73-41A6-4424-8EE3-8E2D14C18AED.jpeg
    276.4 KB · Views: 0
The last bucket brush motor I supplied came from Eastern Attachments as it was made for that OEM. If you can @JohnDeere8530 a part number I'll see if I can get one. Are you looking for a motor seal kit?
IMG_20221123_100349.jpg

A motor seal kit would be good. The bearing closest to the flange has also failed but I've read somewhere else on the forum about replacing it with a nylon bush which I might end up doing. Been quoted £115 for a seal kit but probably not going to be in until the new year. Also had a quote for a motor at just under £400 but got a 30 week lead time so I'm really starting to scratch my head. Been thinking about putting a motor on with different mounting holes and adapting the brush to fit but struggling to find one with a 14 tooth 32 mm splined shaft.
 

Mr Happy

Member
Location
Norwich
View attachment 1078624
A motor seal kit would be good. The bearing closest to the flange has also failed but I've read somewhere else on the forum about replacing it with a nylon bush which I might end up doing. Been quoted £115 for a seal kit but probably not going to be in until the new year. Also had a quote for a motor at just under £400 but got a 30 week lead time so I'm really starting to scratch my head. Been thinking about putting a motor on with different mounting holes and adapting the brush to fit but struggling to find one with a 14 tooth 32 mm splined shaft.
I'll see what price and availability I can find on your Danfoss motor. If it's only available from the dealer I'm sure we can supply an alternative but it probably will have a different shaft and mounting arrangement.
 
Tags
deere

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,293
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top