Abac air compressors

[holly smoke]

Evening all the motor has burned out on my air compressor. I can’t find the motor speed on it as it doesn’t have a plate on it.
Hope to get some info from the masses

 

[Netherfield]

Very probably 1440 rpm, 2880 would be too fast and 720 too slow.

 

[holly smoke]

Very probably 1440 rpm, 2880 would be too fast and 720 too slow.

Thanks for that i was swaying towards the slower rpm.

 

[Servac]

A lot of compressors i have come across are 2 pole 2800rpm.

 

[milkloss]

Evening all the motor has burned out on my air compressor. I can’t find the motor speed on it as it doesn’t have a plate on it.
Hope to get some info from the masses

if Ours still has a plate I can take a look for you tomorrow

 

[bigg6480]

I had the same problem. I called Spaldings as they sell them and got the answer over the phone straight away.

 

[Muddy Plox]

Got a 2nd hand ABAC used to run three Merlin robots if it’s of any interest to anyone. Only run for about 18 months. Thank God Robots were then taken out.

 

[holly smoke]

if Ours still has a plate I can take a look for you tomorrow

That would be great thanks