accord drill markers
- Thread starter Case man
- Start date
- Location
- south norfolk
Dirty magnets?
nick…
nick…
- Location
- N.Lincs
.......or dodgy sensor......or bad wire connection
Mark C
Member
- Location
- Bedfordshire
Vertical or wire rope markers?
Either the magnet isn’t registering the Reed switch or there is a broken wire somewhere
Either the magnet isn’t registering the Reed switch or there is a broken wire somewhere
hydraulic
Broken wire or bad magnet I'd say
can you buy magnets online
No idea probably more chance of being a bad wire or sensor anyway
Mark C
Member
- Location
- Bedfordshire
With both markers up and the magnets close to the Reed switches , if you can advance the sequence by pressing the button on the box then I’d bet a packet of Jammy dodgers That you have a broken wire between the sensor and the junction box.
thats what it does
- Location
- Le Veurde, Allier, France 03320
Normally the Reed switches in my experience too. Andrew Guest stocks them and they’re not too expensive. You can get them for 2 or 3 quid from RS but knowing the correct spec is the problem there.
- Location
- Herefordshire
- Location
- Le Veurde, Allier, France 03320
Where did you get them from?
clbarclay
Member
- Location
- Worcestershire
No trouble to find lots of magnets online. Finding ones about the right size made take some time. Unless they are obviously broken up or missing, then they are highly unlikely to be the problem.
- Location
- Scotland
Think I've a reed switch gone. Tramliner jumps a few steps of it's own accord now and again. But only going 1 direction.
Also can't always move the light on a step, even with marker down.
Also can't always move the light on a step, even with marker down.
- Location
- flintshire
mine plays up , so it was a case of sod it and use the gps to spray !!!!!!!!!
- Tags
- gps