Amatron 3 horsch aprinter variable rate

[Alastair Garratt]

I am using an Amazon Amatron 3 as an isobus screen to run my Horsch Sprinter.



I have imported my shape file from Omnia. This all looks good.



But does anyone know how I make it control the rate? In the Amatron 3 manual it says something about setpoints which I have found but it doesn't make sense to me.



Thanks in advance.

 

[Northern farmer]

Do you have variable rate app activated (or the 50 h test period still running)?

The manual should be reasonably clear, first import the VRA shape file and then change rates for different levels if needed.

 

[Alastair Garratt]

Hi Northern Farmer.

Thanks for that. I think I was assuming that the 50h would be automatically activated. Any idea how to activate it. I have gone into licenses and it says deactivated.

But it says 50h on the front screen.

 

[Northern farmer]

Not really sure about this all but my understanding too is that the test version is automatically activated for 50 hours. Time runs only when the particular feature is in use. On the licence manager page, time should be running down, the remaining time shown for test use. On the info page the available time is shown. Sounds like the 50 h test time has expired?

 

[bobalobmitchell]

This seems like a good tutorial on youtube,

Would it be a case of ticking the gps-switch box in the licences section? Assuming the 50hrs or less is still remaining.