amatron 3 Trimble nomad

[bart88]

Hi all using a Nomad worked fine on Kuhn changed spreaders put it on Amazon's amatron 3 with the latest software update. I cant get GPS on any other baud except 9600 on the nomad. amatron 3 terminal only gives me 2 options 57600 and 19200 im connected in the ASD port but the 2 are not chatting any ideas folks?

 

[Rhiza-UK]

On the Amatron 3, select 57600 for ASD baud rate. On the nomad, on the VRA job screen, go to the red tractor icon and create a new device setup using Amatron as the device type, check the existing working Kuhn setup for the comm port setting.

 

[bart88]

Great cheers I'm also understanding that when the nomad is connected to the amatron it creates another job order so there should be 21 job orders its not doing that either so Im thinking its maybe s cable issue or I need to try a null modem?

 

[Rhiza-UK]

As it's acting as a slave to the Nomad I'm not sure it should create any work orders....I think that would be if you were plugging the USB stick directly into the Amatron 3 and it saw 21 files. It does need a null modem from the Nomad to the amatron though.

 

[bart88]

Fantastic I shall try it on Monday and see how I get on thankyou for you help much appreciated.