Anyone into Land Rovers

[Cornish Rattler]

The bits are more or less in now so tomorrow I will post more pic's

 

[roscoe erf]

i'm cracking on a bit now but with all things as you take off more parts you find more that need attention

 

[Cornish Rattler]

View attachment 804708 View attachment 804710 View attachment 804712 View attachment 804714 View attachment 804716 i'm cracking on a bit now but with all things as you take off more parts you find more that need attention

Thats landy's for you, if i can i try and look at the bigger picture when taking things off saves more hastle later.

 

[Ukjay]

I'm not into landy's
View attachment 797892

are you into Daihatsu then

 

[roscoe erf]

got a bit more done

 

[roscoe erf]

are you into Daihatsu then

only breaking them

 

[Ukjay]

only breaking them

They were a good vehicle IMHO. Better than some modern shite.

 

[Deutzdx3]

getting ready to put into the 110 pick up. All 5.9 litres of her.

 

[Cornish Rattler]

Fitted the rear door, fuel filler pipe, breather pipe and fuel filler today

 

[Cornish Rattler]

today I fitted the pedal boxes inc new master cylinder's and gaskets, fuel filter after painting the filter head and the accelerator linkages oh and the rear door handle but I forgot to take a pic of that

 

[Cornish Rattler]

Did a bit more on Saturday and today, Saturday I removed the old oil cooler pipes I had connected to the engine ready to fit the new ones I've ordered, I also removed the 300tdi radiator to make way to fit a new 200tdi radiator as when I fitted the fan belt I was struggling to get earlier this year I found the bottom hose wouldn't fit as the fan belt was in the way so I replaced it today and re-routed the bottom hose to fit the radiator then I fitted some new rear mud flaps, couldn't fit the fronts as the wings need to be fitted but i'm not ready to fit them yet, still waiting for more parts to arrive then I will report back this weekend coming, will post pic's later

 

[Cornish Rattler]

Here you go

 

[bumkin]

Here you goView attachment 813774 View attachment 813776 View attachment 813778 View attachment 813780

it will be a shame to get it dirty

 

[Cornish Rattler]

Thats the plan not to get it dirty

 

[Cornish Rattler]

Fitted some of the fuel lines today, just need to get a couple of series supply pipes for fittings to make up a new supply pipe and a return pipe, then I moved onto fitting the front shocks, fitted one then found out the N/S/F spring plate was the wrong one for the car as the shocker is to close to the swivel housing flange, think its from an S1 so I need the correct one now

 

[goldtop]

Here you goView attachment 813774 View attachment 813776 View attachment 813778 View attachment 813780

Looks like you may have to dismantle it again to get out the shed.

 

[Cornish Rattler]

Haha no the front of the apex opens up over the doors, got plans for next yeah to alter the front and fit bigger doors

 

[Tomr10]

Looks a good width

 

[Cornish Rattler]

Yeah the garage its self is 18'6" X 18'3" with 6'4"H X 8' W doors which was ideal for when i had a Disco1 but the Def i had was close to 7' 4" High so had to do something to get it in and the 2a is something inbetween now hight wise.

 

[Tomr10]

My mum crashed her 1 day old county into the roof of a multi storey car park going over a speed bump. Alough it went under the height barriers.

Was a few inches taller the the 90 it replaced