Is it any better of an out put to the old reiable 40n as it all looks the same, only difference I can see that the chassis is made in such a way to try and narrow the width of the machine and the sharp angle the main pull is to the main drive shaft on the draw barMainly bearing and feedroll failures. Not a patch on the old mengele.
They claim its designed for over 300 HP. I see there s no braces on the tower of the spout .I ed say it bounce s a lot tooTBH I think the trailed chopper has had is day. Works well in lighter crops in good conditions. Try and speed the job up with 200hp+ and they self distruct. Not a cheap machine to buy either.