Arable operator with 17 years experience looking for permanent full time arable job in Yorkshire.
Currently living in East Yorkshire but would be prepared to move for the right role.
Experience and qualifications as follows :
Qualifications:
Category H track layer/crawler tractor.
PA1 and PA2 spray Certificates.
PA4S (slug pellets) certificate.
PA4G (granular pesticides) certificate.
PA6 (knapsack)
Health and Safety on Farms Certificate
Rodent Control on Farms Certificate
Mental Health in Agriculture Certificate
Non Technical Skills in Farming Certificate
GNVQ ICT - Pass (equivalent to 4 C grades)
Full (Clean) Drivers License since august 2007
Certificate in Basic Tractor Driving and Maintenance
Teleporter safety and operation 1:1
Fork Lift safety and operation 1:1
CSCS health and safety certificate
CPCS A59a 360 degree excavator card obtained from East Yorkshire (plant) training for both above and below ten ton machines (expired).
Agricultural Experience
Tractor driving up to 420HP (All major brands, wheeled, half tracked and rubber tracked)
GPS Technology (Trimble, Greenstar/Autotrack, Massey auto steer, TopCon, RTK)
Extensive telehandler and fork lift truck work.
Plant machinery work (360 excavators from 1 to 18 tonnes, Rollers, Loading shovels)
Ploughing (Mould board and Chisel ploughing/Dragging)
Power harrowing (4,5 and 6 meter)
Drilling (6 meter horsch pronto air drill)
Subsoiling (2-5 leg)
One-pass Cultivation (Vaderstad Top down)
Spring-tine Cultivating
Culti-pressing/pressing
Rolling (rollers of various sizes up to 19 meters)
Baling (MF 2250 3x3 with sledge, MF2190 4x4)
Trailer work with grain trailer up to 20t, low loader, bale trailer, header trailers and artic trailers with dolly.
Combining
Fertiliser Spreading
Vacuum tanking
Flail mower work (Hedges and verges)
Turning hay and straw
Straw raking/stubble raking
Muck spreading (Rear and side discharge)
Stock work (Chickens, Pigs, Cattle and Sheep)
Workshop work including welding and fabrication although this area could use some improvement!
Extensive manual work including drainage work, brushing and shovelling etc
Machinery maintenance, always like to have my own tools and my own grease gun with me, im a big fan of looking after machinery properly.
Please feel free to message me on here, email [email protected] or call or message me on 07860363858.
Thank you and kind regards
Jon.
Currently living in East Yorkshire but would be prepared to move for the right role.
Experience and qualifications as follows :
Qualifications:
Category H track layer/crawler tractor.
PA1 and PA2 spray Certificates.
PA4S (slug pellets) certificate.
PA4G (granular pesticides) certificate.
PA6 (knapsack)
Health and Safety on Farms Certificate
Rodent Control on Farms Certificate
Mental Health in Agriculture Certificate
Non Technical Skills in Farming Certificate
GNVQ ICT - Pass (equivalent to 4 C grades)
Full (Clean) Drivers License since august 2007
Certificate in Basic Tractor Driving and Maintenance
Teleporter safety and operation 1:1
Fork Lift safety and operation 1:1
CSCS health and safety certificate
CPCS A59a 360 degree excavator card obtained from East Yorkshire (plant) training for both above and below ten ton machines (expired).
Agricultural Experience
Tractor driving up to 420HP (All major brands, wheeled, half tracked and rubber tracked)
GPS Technology (Trimble, Greenstar/Autotrack, Massey auto steer, TopCon, RTK)
Extensive telehandler and fork lift truck work.
Plant machinery work (360 excavators from 1 to 18 tonnes, Rollers, Loading shovels)
Ploughing (Mould board and Chisel ploughing/Dragging)
Power harrowing (4,5 and 6 meter)
Drilling (6 meter horsch pronto air drill)
Subsoiling (2-5 leg)
One-pass Cultivation (Vaderstad Top down)
Spring-tine Cultivating
Culti-pressing/pressing
Rolling (rollers of various sizes up to 19 meters)
Baling (MF 2250 3x3 with sledge, MF2190 4x4)
Trailer work with grain trailer up to 20t, low loader, bale trailer, header trailers and artic trailers with dolly.
Combining
Fertiliser Spreading
Vacuum tanking
Flail mower work (Hedges and verges)
Turning hay and straw
Straw raking/stubble raking
Muck spreading (Rear and side discharge)
Stock work (Chickens, Pigs, Cattle and Sheep)
Workshop work including welding and fabrication although this area could use some improvement!
Extensive manual work including drainage work, brushing and shovelling etc
Machinery maintenance, always like to have my own tools and my own grease gun with me, im a big fan of looking after machinery properly.
Please feel free to message me on here, email [email protected] or call or message me on 07860363858.
Thank you and kind regards
Jon.