Are all NH Bale Command Plus the same ?

[e5c0rt.mk1]

Hi
We've got a NH br7060 baler and the bale command plus is wired into one of the tractors.
We also have a moniter and harness of the last NH baler, the moniter is slightly older version, square corners on it, but is a bale command plus.

Just wondering if the moniter off the old baler would work on the current baler? If it does, i could stick it in another tractor.

Thanks

 

[jthomsonagri]

Only one way to find out for definite! I would of thought if the plugs are all the same and it is also a bale command plus then it should work fine.

 

[IHA]

I had both NH 648 and 7060 balers at the same time both controls looked the same plugs, sockets were all the same! But one wouldn't work the other, I suspect they are wired differently!! We thought we could use any of the wired tractors to go on either baler!! New Holland had other thoughts.

 

[e5c0rt.mk1]

Thanks, didnt want to just plug it in, incase something blew.

I've had a look tonight and the wiring harness is different.
I'm going to give just the moniter a go tomorrow on the baler, if it does work i'll alter the harness

Thanks again