Yes but wouldn't a concrete muncher be better be some hardcore for farmerWould a demolition shear on a digger cut through the concrete rafters on a Atcost building ?
To take one downJust read thread again,
Why would you want to ?
I doubt it's a massive building as it's probably 50 year's old. Probably best to break it down with a swing shovel and burry it below the base of another building or track.I'd hire a long reach demolition Machine with a muncher for a day unless it was really expensive, no need for telehandlers it cherry picker or peckers, everybody out the way, concrete can he used for full and steel in the scrap pile, job done.
Push it over and attack with breaker on 4or 5 ton machine plenty big enough,We have a old chisel out of the breaker with a 6 " sq x1" thick plate welded to the chisel with stiffeners on it and about 1" of the chisel protruding through,It knocks the concrete of the steels in no time at all and you will have no rebar lying about waiting to cause puncturesThanks for the offers. My firm puts up buildings just never been asked to take a n atcost one down before
We’ll probably just use 13t machine
Asbestos maybe???Okay,
Just lift of with long reach Telehandler, only on pins, then push over posts, they will break at the base,
Could offer my services. If you require.
Does the roof need removing as well,
We have 50yr old Atcost portal frame building with a water damaged column re-bars are rusted and exposed help needed ,Hampshire thanks. [email protected]Dead easy to do with a telescopic lift the purlins off off then deal with on the ground. As grainboy says. If its down south we would do it for you.