Auger for shelbourne powermix pro13

Horn&corn

Member
They’ll normally only break them once the auger is worn out. I’ve seen many Shelbourne tubs relined. Any way a decent blacksmith could rebuild the original?
 

Tony1989

Member
I thought that would be the case! This one has been relined. We could do it ourself but it just looks a right ball ache! Looks like we will have to have a go
 

KennyO

Member
Mixed Farmer
Location
Angus
@fermerboy did you not rebuild a tub auger or was it someone else

Also to the op I think there was a company called rotospiral that used to advertise in some of the farming press.
 

Tony1989

Member
@fermerboy did you not rebuild a tub auger or was it someone else

Also to the op I think there was a company called rotospiral that used to advertise in some of the farming press.
Thanks, RS did mention rotospiral, but I think they are in Ireland and they need the old one sent over, il give them a call
 

fermerboy

Member
Location
Banffshire
@fermerboy did you not rebuild a tub auger or was it someone else

Also to the op I think there was a company called rotospiral that used to advertise in some of the farming press.
Good memory Kenny!!

We re-augered and re-lined a RMH 12cube mixer.
It was a few years back now and I think a new auger from RS agri was going to be about £4k against getting new flights from Rotospiral in Ireland about £1800.

Ideally I'd have pulled the auger out, sent it to them and got it done, but we are in North East Scotland and they are in Southern Ireland so carriage both ways killed that idea. So I sent them full dimensions and photos and they sent new flights back in sections on a pallet which we welded on.
Have to say they were pretty much spot on, very little trimming required, I enjoy a project and welding, but it was a fair heavy job.
One thing worth noting is you can have the auger drilled to suit any blade choice you prefer(cheaper, stronger easier to get, etc) if you want
I see that Rotospiral are in the UK now so that would change the whole game as far as delivery etc, I'd definitely use them again no problem, the mixer is still going strong.

We lined the bottom 4 feet of the sides with 4mm plate, used a hydraulic ram to bend the sheets into shape and weld in, trimming them to fit was a pain with the curve and the slope of the sides meaning that the bottom edge was a tricky cut. We did away with the troublesome cross conveyor and moved the door to the side which was a lot of extra work but worth it for us.

It was somebody on here that put me on to them but for the life of me I cant remember who. :banghead: :banghead:
 

Tony1989

Member
Good memory Kenny!!

We re-augered and re-lined a RMH 12cube mixer.
It was a few years back now and I think a new auger from RS agri was going to be about £4k against getting new flights from Rotospiral in Ireland about £1800.

Ideally I'd have pulled the auger out, sent it to them and got it done, but we are in North East Scotland and they are in Southern Ireland so carriage both ways killed that idea. So I sent them full dimensions and photos and they sent new flights back in sections on a pallet which we welded on.
Have to say they were pretty much spot on, very little trimming required, I enjoy a project and welding, but it was a fair heavy job.
One thing worth noting is you can have the auger drilled to suit any blade choice you prefer(cheaper, stronger easier to get, etc) if you want
I see that Rotospiral are in the UK now so that would change the whole game as far as delivery etc, I'd definitely use them again no problem, the mixer is still going strong.

We lined the bottom 4 feet of the sides with 4mm plate, used a hydraulic ram to bend the sheets into shape and weld in, trimming them to fit was a pain with the curve and the slope of the sides meaning that the bottom edge was a tricky cut. We did away with the troublesome cross conveyor and moved the door to the side which was a lot of extra work but worth it for us.

It was somebody on here that put me on to them but for the life of me I cant remember who. :banghead: :banghead:
Thanks for all the info👍 The centre tube has gone aswell so will need to renew whole thing pretty much. Il get it out and see what it looks like
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 77 43.5%
  • Up to 25%

    Votes: 62 35.0%
  • 25-50%

    Votes: 28 15.8%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 4 2.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top