B275 injector pump

[Netherfield]

Grandkids are gone home to bed, too dark to work. New battery is on the charger getting topped up for the morning. I did manage to take a close look at that pulley, and there are no set screws that I can see. Now the one obvious set screw hole has been bronzed around but is open and clearly is empty. Directly across form that hole is another bronzed area with a lump of metal in the middle of it. There is no obvious threaded or unthreaded hole in it so I don't know for sure about it. Neither of these spots line up with the grooves in the fan hub, which I assume were put there for the set screw tom seat.

I checked with my local scrapper/restorer and he tells me he has 2 in stock. One is new for 16 pounds ( haven't figured out how to get the green keys to work to use the pound sign) and the other is used for 6 pounds. When I have a chance to pick one of them up to make sure it is what I need, I think the old one will come off in an expeditious manner although without damaging the hub.

Hold down Alt key and type 156 for £ sign.

 

[Mursal]

I checked with my local scrapper/restorer and he tells me he has 2 in stock. One is new for 16 pounds ( haven't figured out how to get the green keys to work to use the pound sign) and the other is used for 6 pounds. When I have a chance to pick one of them up to make sure it is what I need, I think the old one will come off in an expeditious manner although without damaging the hub.

That doesn't sound expensive .............

 

[averageguy54]

IT LIVES!