Baker boot

[Ritchie]

Anyone know who can supply baker type opener for an s type tine. Spring tine cultivator type.


Ritchie

 

[Hartwig]

Sim-Tec / Aitchison ??

 

[Ritchie]

No, they are for heavy square type ones, looking for ones for standard spring tine cultivator type of tine. Thinking of making something to oversow grass seed but shallow.


Ritchie

 

[Jim Bullock]

Not sure such a coulter exists...the Simtech coulter fits on to either a 25mmx25mm tine or on the latest drills a 30mmx30mm tine..

 

[Ritchie]

Similar to these
http://www.maxipoint.com.au/products/points/inverted-t-ezi-fit-system

Ritchie

 

[BSH]

I think the Taege drill uses an S type tyne, but there is no uk importer. You would have to import from NZ direct.

 

[Ritchie]

Thanks BSH.
Been looking at more of the maxipoints, some quite promising looking ones there.


Ritchie

 

[JD-Kid]

duncan used to make a S tine till seeder
http://www.trademe.co.nz/business-farming-industry/industrial/other/750/auction-611098898.htm
think had a seeder tube welded to back of tine with a knife opener ummmmm was so-so they dropped it and went to the inch tines
teage use the bigger S tines used to use the smaller ones they also have a angle on the mounting so tine sits back
http://taege.com/html/body_3pl_vineyard.html one of the pic's on there shows the set back makes the tine move up and down more than backwards and forwards like the work on a tiller

dont think those maxi points yer talking about would fit a S tine not alot of s tine machines in Oz and would not be used for DD so i would question if they are made there

we see some cast points here for S tines but too big for DD

you could get 6 mm bisalloy 650 and weld on to standard points to make a knife opener even the teage is more a knife than a t opener

 

[SilliamWhale]

What are you up to Ritchie?

I thought you already got an aicthison?

(p.s. am i the only one who can never seem to spell aitchison?)

 

[JD-Kid]

better spell checker will

 

[5312]

Thanks BSH.
Been looking at more of the maxipoints, some quite promising looking ones there.


Ritchie

Did you try the Maxi point boots? How did you get on with them. I was interested in the Taege ones but they are very expensive compared to the Maxi points.

 

[Ritchie]

No, didn't try sidetracked my funds into a 7.5 meter weed wiper. Need to recoup some funds. Your right JD-Kid looking for more of a knife opener to tear through the sward and roots and seed blown into slot with an air drill.

Ritchie

 

[Tractor tom7480]

I can supply baker boots if your still looking? PM Me

 

[marklr90]

Anyone find a supplier of 3 piece baker boots for s tines? Much difference in overall performance between using the angled s tines or the coil tines on duncan/aitchison? Either one better for not pulling up stones? S tines are cheaper to buy than coil tines anyway.