Banjo Fittings
- Thread starter rhsl
- Start date
Lincs Lass
Member
- Location
- north lincs
Much like a Camlock
www.ukpumpsupplies.co.uk
High Quality Camlock lay flat hose joiner kit,type C+E ALL SIZES | eBay
CAMLOCK C TYPE - slot with hose adapter is made of. CAMLOCK E TYPE – pin with hose adapter is made of.
www.ebay.co.uk
Banjo Polypropylene camlock fittings - Reducing couplers and adaptors - Buy online at UK Pump Supplies
Camlock/Cam Lever reducer couplings and adaptors in glass reinforced polypropylene. Buy online today with UK Pump Supplies. Trade discounts for quantity.
www.ukpumpsupplies.co.uk
Few here
www.directwatertanks.co.uk
Banjo Bolted Ball Valves - Tank Parts
The Banjo Bolted Ball Valves are precision moulded polypropylene and reinforced with fibreglass.
www.directwatertanks.co.uk
I am after something exactly like the photo with the handle and 3 lever cam lock, would make handling 3 inch pipes full of water or fert easier, plenty on USA websites can't seem to find any over here.
PART # VSBHB305FP
Description: 3" FULL PORT EASY-FILL VALVE W/CARRY HANDLE
Family: Valves
Style: Full Port
Size: 3"
Type: Bolted
PART # VSBHB305FP
Description: 3" FULL PORT EASY-FILL VALVE W/CARRY HANDLE
Family: Valves
Style: Full Port
Size: 3"
Type: Bolted
Last edited:
- Location
- Lincolnshire
Why not order direct from the US? I’ve ordered spray nozzles etc using my card over the phone. Arrived within 48 hours. Sometimes cheaper than can be had here. Sometimes they need a touch with a hacksaw to cut a bit off that stops them fitting in my caps.
I used Fairbank Equipment Inc.
I used Fairbank Equipment Inc.
- Location
- North Yorkshire
Give Spraytrac a call in Yorkshire 01423 322377, that banjo set up in your photo will just want building to spec out of standard components
- Location
- Minehead,Somerset
Saw "Lawson" farms on U tube have a few of those fittings last year and like you thought they would be good . He buys his stuff from "Ag Chem Solutions" but no idea if they would export parts to UK ?
Be intrested how you get on .
How about @SimpersTradeCounter for a source?
Be intrested how you get on .
How about @SimpersTradeCounter for a source?
Have spoken to our local spray outfit who spoke to Banjo uk and apparently none been sold in UK at the moment and would take 4 weeks to get here, plus price is quite high.
My arthritic hand might appreciate it I think though
I looked at Agchem solutions as you can pay by card and delivery was about $80 from USA
My arthritic hand might appreciate it I think though
I looked at Agchem solutions as you can pay by card and delivery was about $80 from USA
- Location
- Essex/Herts Border
"Larson", I would think Ag Chem Solutions would export for the right price.
Chae1
Member
- Location
- Aberdeenshire
Just get a tank fitting and screw the banjo coupling onto where it screws onto tank. I made up something similar the other day.
- Location
- Minehead,Somerset
The above picture is what I have but the handle would be a benefit as on 3 inch pipe full of liquid , quite often as you undo from sprayer it twists and combination of weight and slippery plastic means you tend to drop it to avoid getting wet which is not great for the fittings or your wrists if you try and hold on.
- Location
- Lincolnshire
3" Banjo Full Port Easy-Fill Valve With Carry Handle - VSBHB305FP | FarmChem
VSBHB305FP Eliminates multiple fittings for fill applications Available in 2" and 3" sizes Full flow (full port) design Stubby valve configuration reduces profile Extended coupler prevents handle interference Maximum operating pressure 100 psi
- Location
- Yorkshire Dales UK.
look for "Camlock Lever". fittings that what there called for water pumps.
https://www.ukpumpsupplies.co.uk/bu...-lever-cam-and-groove-couplings-adaptors_1217
this may help.
https://www.ukpumpsupplies.co.uk/bu...-lever-cam-and-groove-couplings-adaptors_1217
this may help.
- Location
- Holderness
Do you have air on your tractors? If so tap an air line into the 3" pipe work then you can blow the pipe empty into the sprayer. Makes a massive difference to handling a 3" and even a 2".
Strungup52
Member
The handle itself is available from that company to bolt onto the bolted 2” or 3” valve/coupler you may already have.I'm tempted to order one for my self.3" Banjo Full Port Easy-Fill Valve With Carry Handle - VSBHB305FP | FarmChem
VSBHB305FP Eliminates multiple fittings for fill applications Available in 2" and 3" sizes Full flow (full port) design Stubby valve configuration reduces profile Extended coupler prevents handle interference Maximum operating pressure 100 psishop.farmchem.com
One or ten requests for the bolt on handle from UK dealers will likely get it available in UK, or a little ingenuity could produce one in 15 mins in the farm workshop.
- Location
- northumberland
Can you not just get the handle https://shop.farmchem.com/product/h25053/ then get someone with a 3D printer to knock a few up
Hadn't thought of that, any pictures on how its done?
We have similar set up at moment filling a Horsch 5lt , the 3 inch arag valve is quite a lump and how ever we position it it doesn't seal 100%, needs a 3 cam lever camlock I think, which I see is available but only in a NPT fitting not BSP.
Last edited:
