Bearing ID

[Dave W]

A non valued Hazard county hillbilly/customer has asked me to sort some bearings on a DD packer roller. Not like anything I've ever come across before
Heavy Pressed steel housing with a 55mm bore. Simba and agrilinc list similar looking bearing but only with 60mm bore.
and yes I've tried kramp, Granit and all the decent local bearing factors.
there is a number stamped on case but doesn't seem to mean anything.

 

[R&D]

I have seen them on simplybearings website before, not sure on sizes though.

 

[Dave W]

I have seen them on simplybearings website before, not sure on sizes though.

Can find plenty 60mm. Nothing 55mm

 

[Tim G]

Crank up the lathe and make some collars.

 

[bobk]

Can find plenty 60mm. Nothing 55mm

Tried 2 1/4 inch

 

[Dave W]

Crank up the lathe and make some collars.

Thought about that. But how long will 2.5mm wall A take to make and B last. Takes some hammer on a packer

 

[Tim G]

Phone call to simba then.

 

[spark plug]

Hmm, looks a bit odd ball, could you recycle the housing and just replace the insert?

 

[Dave W]

Hmm, looks a bit odd ball, could you recycle the housing and just replace the insert?

Considered that. The 2 flanges are welded together but won't be hard to drill out

 

[roscoe erf]

get the welder out

 

[Monty]

Peer FD2112316RD Seedbed Finisher Round Bore Relubricatable Flanged Disc with Bo Simply Bearings Ltd

simplybearings.co.uk

55.58mm ID?

 

[bobk]

Flanged Disc Unit Round Bore: Flanged Disc Bearings & Bearing Units

simplybearings.co.uk

55.58mm ID?

70 squid a go .

 

[ih1455xl]

Give these lot a bell they might know https://www.agricast.net

 

[startinghandle]

There are a number of online specialist stocking a huge quantity of bearings or is this a manufacturer of machine only place to go

 

[Dave W]

Peer FD2112316RD Seedbed Finisher Round Bore Relubricatable Flanged Disc with Bo Simply Bearings Ltd

simplybearings.co.uk

55.58mm ID?

Thank you. They were a fairly loose fit on the shaft so spot on

 

[ACEngineering]

A non valued Hazard county hillbilly/customer has asked me to sort some bearings on a DD packer roller. Not like anything I've ever come across before
Heavy Pressed steel housing with a 55mm bore. Simba and agrilinc list similar looking bearing but only with 60mm bore.
and yes I've tried kramp, Granit and all the decent local bearing factors.
there is a number stamped on case but doesn't seem to mean anything.

You and your bearings How that Valtra going? wheels fell off yet?

 

[Dave W]

You and your bearings How that Valtra going? wheels fell off yet?

Dozy pillock Can't find 2 hours spare to drop it off. He'll moan like mad when gear bearings full of metal as well

 

[Will 1594]

Phillip Watkins fit a lot of dd packers , we got one for subsoiler. They will know