Bentall mill and mix

[Matt77]

Anyone know if you can spares for the slated mixer?
Cog is no longer cog shape!!!

 

[roscoe erf]

Anyone know if you can spares for the slated mixer?
Cog is no longer cog shape!!!

is it the blue one looks like this

 

[Matt77]

The mixer looks very similar, in size at least, I’ve a skiold mill on top of ours now.

 

[roscoe erf]

The mixer looks very similar, in size at least, I’ve a skiold mill on top of ours now.

ive got one here that id sell only thing is the slat chain has broke and as i don't use it i haven't fixed it would make a good source of spares

 

[Matt77]

Ok thanks, I’ll keep you in mind if that ok, I’ve a neighbour who also might have one for spares, not seen it yet, just wondering if I can order the cog and be done with it, rather than collecting something, stripping it down, finding it doesn’t quite fit, etc etc, but thanks.

 

[mixed breed]

Anyone know if you can spares for the slated mixer?
Cog is no longer cog shape!!!

I think spares will be hard to come by, best option may be to buy a plate wheel and a boss to match the sprocket in question and weld the pair together. I'm guessing it's one of the bigger drive cogs, if so they're a bugger to get off

 

[Matt77]

Yes Google didn't show up much, just used machines. It's one of the 6 cogs that drive the chain and slat, it's cast so I can't do much with it, and yep it's looks a pig to get off, probably hasn't been touched since new, many many years ago, old chap who used to work here said he thought over 40 years old!

 

[milkloss]

Won’t be a problem when it’s liquid.

 

[Sid]

Dad used to call them , bent all to buggery

 

[Matt77]

Won’t be a problem when it’s liquid.

a little bird tells me you might be worth a call! I'll give you a buzz tomorrow.