Bit of combine help please

bobk

Member
Location
stafford
Replaced the drum belt on dommy 86

However on refitting the main drive belt I can't see how you tension it up on the spring loaded pulley

@Gapples @carbonfibre farmer @Phil P or anyone else thanks

IMG_0244.JPG
 

Phil P

Member
Arable Farmer
Location
North West
Sorry @bobk thats not a model I’m familiar with so can’t be much help. Have you not got an ops manual? They usually give you the procedure for replacing and tensioning all the belts.
 

Andy26

Moderator
Moderator
Location
Northants
 

MF-ANDY

Member
Location
s.e cambs
That is not the drum pulley or the drum belt. Both of those are on the other side.
That is the separator engagement belt and the big pulley is on the impellor shaft. The belt will be slack until you engage the sperator lever the there will be a measurement for the spring on the linkage. I will have a look in my book when I get time.
 

bobk

Member
Location
stafford
Well if you are talking about the drum belt and how to tighten it why have you posted a picture of that side. If it's the drum belt with the variable pulleys then I don't think there us an adjustment
I'm not talking about the drum belt , that was the job , the problem is the tensioner on the drive belt , as shown in the pictures
 

Will you help clear snow?

  • yes

    Votes: 70 32.0%
  • no

    Votes: 149 68.0%

The London Palladium event “BPR Seminar”

  • 13,802
  • 223
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top