- Location
- 200 miles N,NW of New York
@multi power what do you thin of this,
http://parristractors.com/used-farm-machinery/details.php?id=2622&src=1
http://parristractors.com/used-farm-machinery/details.php?id=2622&src=1
bit of p0rn for multi power
- Thread starter Pennine Ploughing
- Start date
REStracTORATION
Member
multi power
Member
- Location
- pembrokeshire
I think he will be asking a lot of money for it, and yes it's very nice and it will take a long time to find another
But it's not a banner lane tractor
But it's not a banner lane tractor
- Location
- 200 miles N,NW of New York
where are you going to find 1 as good as that
REStracTORATION
Member
multi power
Member
- Location
- pembrokeshire
Don't get me wrong it's a lovely tractor, had it been a 399 I'd have been more excited
Northeastfarmer
Member
- Location
- Cleveland
Where does Paris find such mint tractors
multi power
Member
- Location
- pembrokeshire
Just think of a number, double it then add 2k
- Location
- South Wales UK
POA As usual !!!
76masseyman
Member
- Location
- Lincolncestershire
I believe Ben Craig did the Muir Hill.
smcapstick
Member
- Location
- Kirkby Lonsdale
I'm sure it's as expensive (or even more so) as buying an ordinary one then paying @REStracTORATION to mint it up.
REStracTORATION
Member
smcapstick
Member
- Location
- Kirkby Lonsdale
B
Bookings being taken for august 2018 >
Just out of interest, what would it cost to turn my 698, assuming you've seen it on here or on the website, in to a thing of real beauty like the above at Parris?
REStracTORATION
Member
Its hard to tell but to our standard 5-10k ish cosmetically.
Every tractor is different,parts are awkward to get plus there will be a fair bit of metal work on the cabs to do.
smcapstick
Member
- Location
- Kirkby Lonsdale
That sounds pretty reasonable.
I wouldn't consider sending a rot box to be restored - it would break the bank. A good example brought up to excellent makes far more sense to me.
I wouldn't consider sending a rot box to be restored - it would break the bank. A good example brought up to excellent makes far more sense to me.
REStracTORATION
Member
You should see some of the piles of junk that turn up that are supposidly "just ready for paint" i try and see most tractors before hand and discuss the budget which is an estimate at best because until you strip them down you really dont know what your going to find. I work closely with all customers and are welcome to come at any time an view their tractors through the process
We wont touch then unless mechanicly they are sound we dont paint piles of crap they just bite you in the ass or damage our name.
We like to do the full job then we are sure whats been done ect but in respect alot like to do the mechanicles thier selves which is fine by us.
We have to be resonable as cost does run we want to turn good quality work out that we are proud of, but most importantly the customer is really happy
Most people park their tractors up and do shows with them and buy another for working they absolutly are over the moon with them
Which is really pleaseing.
- Location
- 200 miles N,NW of New York
have you not a spare slot over this winter for a paint job? MF 135B
Bookings being taken for august 2018 >
REStracTORATION
Member
Not really sorry unless there is a cancelation
- Location
- Larne, Northern Ireland
Another one for @multi power
https://www.facebook.com/permalink.php?story_fbid=1570303722988480&id=173123399373193
Or incase the link doesn't work. 290 turbo that a guy in County Down restored. Full restoration photos are in the link
https://www.facebook.com/permalink.php?story_fbid=1570303722988480&id=173123399373193
Or incase the link doesn't work. 290 turbo that a guy in County Down restored. Full restoration photos are in the link