Bleeding a MF 3645

[flatliner]

Just replaced the injector pump on our 3645, but can't get her to run. When you turn the engine over there's some white smoke, but she won't fire. It's a Stanadyne pump. Any tips on bleeding the system or anything else I should be checking?

 

[Lincs Lass]

Is the fuel solenoid opening

 

[Lincs Lass]

Have you got the timing right

 

[flatliner]

Yeah, solenoid open. Timing gear is keyed, so I'm assuming the timing should be ok?

 

[Lincs Lass]

Bleed everything from lift pump ,filters,pump screw and an injector

 

[flatliner]

Cheers, i'll give that a go.

 

[will2703]

Hi similar problem but with my cluch ive just split the tractor and put it back together with new cluch plate and re faced fly wheel but the cluch pedal wont blead any sugestions welcome

 

[Farmer_Joe]

Hi similar problem but with my cluch ive just split the tractor and put it back together with new cluch plate and re faced fly wheel but the cluch pedal wont blead any sugestions welcome

Check all unions are tight, could be air stuck somewhere

 

[Timbo]

If youve got an amount of white smoke, youve got fuel, just not at the right time.

 

[masseybreaker]

Hi similar problem but with my cluch ive just split the tractor and put it back together with new cluch plate and re faced fly wheel but the cluch pedal wont blead any sugestions welcome

dont touch the pedal just run the tractor at 1500 rpm and undo the bleed screw and count to 40 that should do it