Blocking Ventillated Crown

[Honeybadger]

Does anyone know if fillers ban be bought to block a ventilated crown as below. We've got a shed to seal up and the cost of cranked crown sheets is crazy.

 

[chickens and wheat]

I'd pack vent with rabbit netting then apply foam into the netting. This should stop the foam escaping down the roof.

 

[David.]

750 girth are not very dear, about £16 ea. Claddex.
I'd do it once, properly.

 

[Bald n Grumpy]

I'd pack vent with rabbit netting then apply foam into the netting. This should stop the foam escaping down the roof.

Won't stop the birds pecking it out though.
As long as you can find someone that fits between the purlins it's an easy enough job to fit new from underneath working out of a basket or lift

 

[Honeybadger]

Won't stop the birds pecking it out though.
As long as you can find someone that fits between the purlins it's an easy enough job to fit new from underneath working out of a basket or lift

New is v expensive as they are the ”wider” ones As it’s an older shed.

 

[Bald n Grumpy]

New is v expensive as they are the ”wider” ones As it’s an older shed.

No idea of cost but expanding foam is not a long term solution IMO and would be concerned about it cracking older sheets. What's the reason for wanting to block the vents?

 

[David.]

New is v expensive as they are the ”wider” ones As it’s an older shed.

The old 5ft girth ones?

 

[Honeybadger]

Yes that’s the ones