Bogballe parts

Agri Spec Solicitor

Member
Livestock Farmer
Is there any non genuine suppliers for bogballe parts ? I’m needing new vanes for fert spinner and I believe the parts are pricey . Mines just a 12m l1 machine

here is the cost of the 12 m genuine KRM vanes in March.
251A2139-BCE8-42B0-B465-8ABE65A0604C.jpeg
251A2139-BCE8-42B0-B465-8ABE65A0604C.jpeg
 

Laggard

Member
Arable Farmer
Location
Suffolk
First thing is to take a picture of the orientation of the discs for later reference,
Then unscrew the agitator, one side is left hand thread and the other is right hand thread, then remove the disc, then remove all the 6mm bolts and pry apart the two housings you will then have the shaft removed,
One hex countersunk bolt on the bottom of this and remove the bushing, bearing, gear, bearing and seal.
Refit as above and don't forget to remove the seal from one side of each bearing, Install a grease nipple on the housing for maintenance.

How do you hold the disc to undo the agitator please?
 

Boysground

Member
Mixed Farmer
Location
Wiltshire
Says in the manual but think it’s left hand side that has left hand thread. Wedge the disc with a block of wood, don’t forget to take the grub screw out.

Bg
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.0%
  • Up to 25%

    Votes: 66 35.1%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,291
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top