Bomford farm trim 435

[MushroomRob]

Afternoon all,

Was after some guidance or a picture of the internals of a kontak valve block fitted on a farm trim
I have a hedge cutter that fell of the back of tractor years ago now trying to fix it,
it snapped the cable connectors off the valve block which i have lathed up some new ones and sorted the spring
but i cant see how it returns the valve when going the other way as the end cap on the other side has nothing in?

Should that not contain a spring and pin??

Any advice be gratefully recieved

Cheers Rob

 

[C.J]

There is a washer either side of the spring ,so that the spring is compressed , no matter which way the lever is pushed/pulled.

 

[MushroomRob]

Thanks- picture what I have just not sure what’s missing to return the valve when pushed in

 

[MushroomRob]

Can you get all the parts -??
bought a new trumpet housing but big wide enough to take the spring

 

[C.J]

Thanks- picture what I have just not sure what’s missing to return the valve when pushed in

O.K I've just had a look at my 435 block and there are 2 "saucers" that go either side of the spring .They go between the end of the spool and the screw in adapter - not where you have laid them out,but where the white letter is on your jumper.

 

[MushroomRob]

O.K I've just had a look at my 435 block and there are 2 "saucers" that go either side of the spring .They go between the end of the spool and the screw in adapter - not where you have laid them out,but where the white letter is on your jumper.

O.K I've just had a look at my 435 block and there are 2 "saucers" that go either side of the spring .They go between the end of the spool and the screw in adapter - not where you have laid them out,but where the white letter is on your jumper.

That’s brilliant - thanks very much for your help. All makes sense now