bondioli & pavesi 2200 gearbox

[DGC1]

anyone know who would do parts for bondi gearbox in uk?
or anyone have 2200 that would sell or break?
looking for whole gearbox or inch 3/4 20 spline input shaft

 

[Deutzdx3]

Kramp are the appointed uk distributor for b&p.

 

[DGC1]

thanks
as far as I know kramp uk will only supply the whole gearbox, or at least that's the info I have from local kramp dealer

 

[Dave W]

Any pics of gearbox?
What's it off?

 

[DGC1]

its got 2200 stamped on the front
its got front input shaft that then splits to a left and right on 90deg angle
its used on meri crushers and ahwi fm700 mulchers

 

[KennyO]

Nightmare to get bit for. I ended up replacing a b&p box with another make.

DIK Bearings in Dundee were very helpful and google images to get a match.

 

[Pheasant Surprise]

Any pics of gearbox?
What's it off?

From the cattle dog...

 

[Pheasant Surprise]

anyone know who would do parts for bondi gearbox in uk?
or anyone have 2200 that would sell or break?
looking for whole gearbox or inch 3/4 20 spline input shaft

Try emailing this bloke at B&P in Italy. Had his contact from a few years ago. Was very helpful at the time.

Federico Righi Riva
[email protected]
Sales & Marketing Manager
RDM Mech. Division
Phone n° +39 0376 5141
Fax n° +39 0376 514444

Bondioli & Pavesi Sales & Logistics S.p.A.
Via 23 Aprile, 35/a
I-46029 Suzzara (MN)
www.bondioli-pavesi.com

 

[DGC1]

yeep that's it

 

[DGC1]

many thanks PS!

 

[DGC1]

Nightmare to get bit for. I ended up replacing a b&p box with another make.

DIK Bearings in Dundee were very helpful and google images to get a match.

Thanks KO, issue I have is that iv got 4no of these boxes on machines now after changing 1no of them to match the other 3no! not sure how easy it would be to find a replacement rated to take 400hp and match the mounting points

 

[Dave W]

I've still got the T shaped ones in the second pic and I'm fairly certain they are 20 spline
https://thefarmingforum.co.uk/index...-for-spearhead-bomford-batwing-toppers.73554/

 

[ROBINWORKS]

I have a listing from one of my suppliers, I will check availability in the morning

 

[DGC1]

I've still got the T shaped ones in the second pic and I'm fairly certain they are 20 spline
https://thefarmingforum.co.uk/index...-for-spearhead-bomford-batwing-toppers.73554/

pm sent

 

[ROBINWORKS]

I have a listing from one of my suppliers, I will check availability in the morning

Early January availability

 

[DGC1]

Early January availability

thanks

can you email me a quote to
[email protected] and to be on the safe side ca you note the part number please
thanks. drew

 

[AFM]

Might be too late but we have Bondioli gearbox’s and waltershcied in stock. https://www.afmachinery.co.uk/produ...ary-topper-parts/gearbox-and-pto-shaft-parts/

 

[Pheasant Surprise]

Might be too late but we have Bondioli gearbox’s and waltershcied in stock. https://www.afmachinery.co.uk/produ...ary-topper-parts/gearbox-and-pto-shaft-parts/

Splitter and wing boxes for the 460s aren’t cheap are they.

Still top marks for putting prices up

 

[DGC1]

Might be too late but we have Bondioli gearbox’s and waltershcied in stock. https://www.afmachinery.co.uk/produ...ary-topper-parts/gearbox-and-pto-shaft-parts/

thanks but sorted out
ended up buying a shaft from Finnish OEM
b&p were very helpful but uk dealer prices for a shaft were ALOT higher than OEM supply figure and b&p didn't have stock....nor would the shaft be back in stock soon.
OEM was sitting with 5shafts in stock.

 

[AFM]

We can also supply parts at discounted rates if anyone is looking for them?
https://www.afmachinery.co.uk/product-category/machinery/machinery-parts-and-spares/