Boom control valve

Discussion in 'Machinery' started by BredRedHfd, Apr 17, 2019.

  1. BredRedHfd

    BredRedHfd Member

    Best supplier to obtain boom control valve for an old Hectacre/Allman sprayer? TIA. IMG_20190417_151414.jpg
     
  2. David.

    David. Member

    Location:
    J11 M40
  3. BredRedHfd

    BredRedHfd Member

    Just spoken to Neil. Hasn't sourced one for 15 years! Looks like it'll have to be a breaker if I can find one...:banghead::scratchhead:
     
    David. likes this.
  4. Reminds me of irrigation control valve tops about 20-25 years ago when I was in Aussie.

    Now to remember who made them :scratchhead:
     
  5. What size are the ports on the valve?

    This is looking more like it...
    DA7E9E21-7F7C-423E-9B71-62CC7280B4EA.jpeg
     
    BredRedHfd likes this.
  6. BredRedHfd

    BredRedHfd Member

    One inch. May have found a 3/4 alternative with slightly different wiring at Spraysure near Lincoln.
    But yes, looks a good match for the old one. Any details/link?
     
  7. BredRedHfd

    BredRedHfd Member

    Delavan on one of the others...
    IMG_20190417_152725.jpg
     
  8. BredRedHfd likes this.
  9. BredRedHfd likes this.
  10. BredRedHfd

    BredRedHfd Member

    Yeah, found that one also.
    We'll see what comes in the post now. Won't be here until Saturday though. Bad timing, only just got spraying too :mad:
    Thanks though for your help. Could be handy info if the part that comes is no good. Much appreciated (y)
     
    Pheasant Surprise likes this.

Share This Page