Box profile sheet repairs

[Andrew1983]

Anyone have any tricks for repairing sheets? Bale fell against the new shed today has to be the first bit seen when drive down into the farm yard Might just be a case of taking the sheet off an replacing it.

 

[Steevo]

Replace is the best option. Sadly all batches seem to be a slightly different colour so getting them to match perfectly isn’t easy.

 

[grainboy]

Take off and swap with one you can’t see, or knock out with block of wood gently,

 

[Andrew1983]

Would be the 1 in the centre that’s probably 20ft long Does boiling water do any good or is that more for plastic car bumpers

 

[TripleSix]

Would be the 1 in the centre that’s probably 20ft long Does boiling water do any good or is that more for plastic car bumpers

You'll never straighten it

 

[Lincsman]

I have seen repairs done on factory walls, all they did was cut the damaged area out and sheet over it, with no damage under it, the new sheet goes on really tight.

 

[JD6920s]

Swap it or think of a sign that could go over it, it’ll always show marks if you try to knock it out.

 

[Robert K]

Swap it with one of the spare sheets left over otherwise it will drive you mad every time you look at it especially if it's in your line of sight.

 

[chickens and wheat]

Get the spray paint out and use the creases as part of your banksie.
The value of your shed could double.

(Investment values may rise and fall)

 

[GeorgeK]

If you just bend it back and leave it looking a bit rough it will repel further damage. A new sheet will get damaged again within days

 

[chickens and wheat]

If you do resheet considered attaching the old sheet on the inside to take the knocks.
Ive done similar in a old garage/store that we resheeted, i used wooden boarding cut out of poultry sheds for windows, perfect fit by coincidence, looks neat inside and protects the sheets.