Buy, New holland pick up hitch

[del_boy]

am looking for a price of either a good tight 2nd hand one or a new one, complete pick up hitch to fit a new holland TSA135 2004 model, currently on a 'down and out type', looking for either the same or the hydraulic push out type as both will fit. cheers

 

[Kevtherev]

QTP do a dromone hitch which are quite competitive,Hyd push out.
I see new ones with saurmann hitches.

 

[Jock]

We have a Bill Bennett down and out one from a TSA 100 sat on a pallet.
Not sure if that would fit a TSA135 though.

Think tractor was a 55 plate. Tractor Came new and unexpectedly to us the bog standard hitch no longer swung out like on the previous range so had to upgrade to the Bennett.

Swapped the hitches back over when we traded it in for a 60 plate. 6020.

Should be fairly tight. It was on a loader tractor that spent every winter with a Ritchie feeder on the back. Only really used for pulling 22ft bale trailers.

 

[bobk]

http://www.mjrobinsontractors.co.uk/viewProduct.php?id=17201

 

[del_boy]

cheers for replies so far
my local nh depo have informed me that i cant buy a hitch off them unless they fit it (for a cost obviously) something to do with the safety side of it, any one heard of this?

 

[Guy]

Never heard of that, dromone sell to anyone.

 

[del_boy]

Cheers guy, this was a dromone that they quoted me on, and they had to fit it! Not keen on paying fitting when i can do it myself!

 

[Guy]

I have good terms with dromone, I'll get you a price after the weekend. Guy

 

[del_boy]

Cheers guy, that would be good.

 

[del_boy]

I recall someone saying either on this forum or the other that with some slight modifying a jd hitch can be made to fit but i cant find anything? These seem alot more popular 2nd hand

 

[nick channer]

cheers for replies so far
my local nh depo have informed me that i cant buy a hitch off them unless they fit it (for a cost obviously) something to do with the safety side of it, any one heard of this?

Pretty sure they told me that when I bought front linkage off guy
Summin to do with the warranty which I can understand
If it fell off at least they no they fitted it properly I guess !!

 

[Guy]

A new dromone unit to fit is £1375 plus carriage

Regards

Guy

 

[del_boy]

A new dromone unit to fit is £1375 plus carriage

Regards

Guy

cheers @Guy that sounds a bit more like it, alot cheaper than ravenhills!
is that a hydraulic push out type guy? got any pics, i cant find anything on there website.

 

[Guy]

Hi yes it's the push- out type . I don't have specific photos but it comes complete with all pipe work and nuts and bolts

Guy

 

[dunkie]

Netherton Tractors have one on their other equipment page, Boccassin usually have a few.