Calibrating clutch packs on maxxum 140

Just wondering if any of you helpful lot know the procedure to calibrate the clutch packs on an 09 plate maxxum 140? I know you have to warm the tractor up first,then switch it off, and start up again holding the up and down power shift buttons at the same time,which brings up CAL on the display,I can't remember what has to be done next.Its multi controller model with 4000 hrs on the clock,16 speed 40k.The clutch is very fearsome when pulling off,more so when the tractor is warm.
 

farmer jay how

New Member
Location
buckinghamshire
I've got 2008 140 maxxum with 3000 hours with 50k box,(y) was four years old with 2000 hours when got it, was running 956xl 1997 two wheel drive and a 956xl 1990 FWD from new, before that, still got both 956xl.;)
140 maxxum is awesome...(y)
 

Oily rag

Member
Not 100% on case but try doing as you said and then set rpm to 1200, shuttle forward handbrake on and press and hold downshift. After each pack press upshift to get next one on to the screen? Let me know if it doesn't work.
 

Oily rag

Member
I'm off with the kids today but il have a look later. It should be a u code if it's a problem. Ring me tomorrow when your with the tractor and il try and talk you through it. 07870513187.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.0%
  • Up to 25%

    Votes: 66 35.1%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,291
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top