Can this be repaired..?

[Steevo]

This tap no longer cuts off properly on one valve. Can it be repaired or is it a case of a new valve block?

 

[Dave W]

@Mr Happy will know.

I've a feeling one of ports unscrews (ones on left of pic) and you can get to the nylon inserts inside. Might be lucky and find something in there

 

[Matt L]

Internals can be changed easily on those

 

[Steevo]

Internals can be changed easily on those

Thank you. Is it as described by Dave W above?

 

[Steevo]

Looking at the photo now I can see some numbers underneath the top tap.

 

[Matt L]

Yeah unscrew the port on the side. Take to top handle off remembering the rotation and slide the guts out

 

[Steevo]

Yeah unscrew the port on the side. Take to top handle off remembering the rotation and slide the guts out

Thank you. Hopefully @Mr Happy might be able to help out with a replacement insert, or I can try the local hydraulic place.

 

[Steevo]

Managed to get some good pictures of the writing

 

[Loftyrules]

Give Andy Scott at call at Scott’s Hydraulics at Ashton Keynes he may be able to sort you out with the bits you need

 

[Mr Happy]

Thank you. Hopefully @Mr Happy might be able to help out with a replacement insert, or I can try the local hydraulic place.

Will need to contact Hydac to see If they are open and what spares are available? They may be an alternative make available.

 

[Steevo]

Seems we're unlucky on this

@Mr Happy confirms no spares available other than a whole new valve block.