Case 4230 pto clutch

[Cowwilf]

Has anyone got a workshop manual for the pto clutch on a 4230? I'd like to get it sorted while the tractors in bits for a few other jobs but not sure how. Is it like the older ih tractors where you go in through the side?

Any help would be appreciated

 

[Gapples]

Has anyone got a workshop manual for the pto clutch on a 4230? I'd like to get it sorted while the tractors in bits for a few other jobs but not sure how. Is it like the older ih tractors where you go in through the side?

Any help would be appreciated

The pto clutch is in exactly the same place as the earlier models but you go in from underneath the transmission.
If its a 4wd that means taking off the 4wd transfer box to get the pto clutch out.
It's not as easy a job as was on the earlier models though.

 

[Cowwilf]

The pto clutch is in exactly the same place as the earlier models but you go in from underneath the transmission.
If its a 4wd that means taking off the 4wd transfer box to get the pto clutch out.
It's not as easy a job as was on the earlier models though.

Great thanks, I'll get the transfer box off and see how I get on.

 

[Gerardo]

my 4230 4wd 1989 is no good torque in the pto , do yuo know what i have to review to find the issue , also the breaks are not working the inside plastic small tank is emty of oil , i dont know why ?

 

[Gapples]

my 4230 4wd 1989 is no good torque in the pto , do yuo know what i have to review to find the issue , also the breaks are not working the inside plastic small tank is emty of oil , i dont know why ?

The plastic bottle Has a steel pipe which drops down in the return pipe.
The return pipe is biggest one when the steel tube drops right down the keep fill bottle ( as its called ) just stays empty.

 

[Gerardo]

thanks , is there other recomended steps i have to check to review how breaks are not working , and also if there is some recoemended steps to review pto not good torque , almos cero when load is there