Case 5150 service manual

[Jim G]

Hi all, I could do with a bit of assistance. I've got a few electrical problems on a 5150 and could do with the wiring diagrams. Does anyone know where I can get a service manual for it? I've been browsing the internet but aren't having any luck.

Any help much appreciated.

 

[Steevo]

You could always ask on here. Plenty of 5100 owners on here.

 

[Jim G]

The rear near side lights aren't working properly. Tail light is ok, brake light doesn't work at all, and indicator is not very bright. I've tested wiring back to the loom at the back end, but want to make sure there are no other joints in it before it gets to the dash. Speedo isn't working either. It looks like it's had a new dash display at some point. When we bought it, it had got 150 hours on the clock, so something has been going on.

 

[davidroberts30]

The rear near side lights aren't working properly. Tail light is ok, brake light doesn't work at all, and indicator is not very bright. I've tested wiring back to the loom at the back end, but want to make sure there are no other joints in it before it gets to the dash. Speedo isn't working either. It looks like it's had a new dash display at some point. When we bought it, it had got 150 hours on the clock, so something has been going on.

There are joints near the rear cab mounts for the lights

Dash's have been known to reset themselves. ..

 

[Gapples]

I think I have a couple of training manuals left & certainly one that is purely electrics for 5100 series.

 

[Jim G]

I think I have a couple of training manuals left & certainly one that is purely electrics for 5100 series.

Are they something you are willing to sell? They would be really good!

 

[Jim G]

There are joints near the rear cab mounts for the lights

Dash's have been known to reset themselves. ..

Thanks for the reply. I've managed to sort the lights. I didn't see the common wire hidden under the mud guard where the conduit comes through to the back end. The mud guards have been painted at some point and it wasn't making contact.

 

[Gapples]

Are they something you are willing to sell? They would be really good!

Yes possibly, I've sold several of my old manuals over the last couple of years, I'll have a look see what I have when I get home

 

[Jim G]

Yes possibly, I've sold several of my old manuals over the last couple of years, I'll have a look see what I have when I get home

Thanks for that, much appreciated