Case 695 help

[Henrysessions]

I’ve bought a case 695 a few weeks ago and I’m going to buy a trailer for it but before I go I want to make sure that the pickup hitch works but I have no idea of how to make it go down. it’s currently up but can someone please point me in the direction of how to use it many thanks Henry.

 

[startinghandle]

I am not sure about your tractor but the previous models the position lever needs raising for the lift arms to lift fully so that driver can move pick up hitch lever
There's a possibility the puh mechanism is stuck

 

[1594mac]

If its an L cab the lever is pushed down with the arms raised you will probably hear the hydraulic pump moan a bit the lever is on the right hand side in the rear corner almost hope that makes sense.

 

[coniser]

Have drove a lot of older IHs had to pull the draft leaver up to get the arms to lift an inch or so more then the hitch leaver should move

 

[v8willy]

Position & draft levers fully up, then push the lever for the hook down, as in push it towards the ground, some have a track & a decal which suggests you pull the lever towards the winscreen, but no, you push it down in a vertical motion.