Case 885 hydraulics

[1594mac]

Hi all does anyone know if there is a constant pumping setting for running a bale wrapper? There is a lever on the rhs in front of the lift controls which if pushed forwards has two positions the first will run the wrapper but then resets any ideas? There are two outlets in the rear and a return direct into the top of the filling plug. I tie the lever to the first position but I'm guessing that's not right

 

[7610 super q]

Hi all does anyone know if there is a constant pumping setting for running a bale wrapper? There is a lever on the rhs in front of the lift controls which if pushed forwards has two positions the first will run the wrapper but then resets any ideas? There are two outlets in the rear and a return direct into the top of the filling plug. I tie the lever to the first position but I'm guessing that's not right

I presume you mean the spool valve lever? They used to supply a clip to hold the lever in constant pumping.Return oil can go into the filler plug, but best plumbed in to return low down in the back end so as not to agitate the oil.Can't remember where it was plumbed in on mine, so can't help sorry.It will work fine as you suggest though.

 

[milkloss]

Bale string. Proper british engineering!

 

[joe bloggs]

A bit of tyre inner tube is the proferred method.

 

[7610 super q]

For the more professional outfits..............

 

[1594mac]

Thanks for the quick responses gents I have tried the twine method and it would move so it was a pita tho if spot on it was great just found it mostly tired to be in a half open position which reduces the wrapper operation also it's a stockman cab so not much room!

 

[Mr Happy]

You could talk to Barcley Williams Ltd tel nr 01386 833694. They specialise in David Brown / Case tractors.

 

[1594mac]

Again thanks I tried case dealer near me so according to them it's no longer available. I had a look at the tractor but can't see how that clip would be fitted as I'm sure something could be fabricated to match the clip! Anyone any dimensions?

 

[7610 super q]

About 6 inches long. Bolts on to main linkage lift lever depth control stop.That's an XL cab mind, don't know if stockman cab is the same layout.

 

[Richard Devon]

what we have done is got a piece of flat which is more or less the same length as the gap between the lever in the extend posn. and the floor and put a 'u' in the top and a small jubilee clip round the stem of the lever to act as a stop and prevents the plate sliding out.

 

[1594mac]

Cheers I had a look earlier and couldn't see where it screwed onto the console. I will get something made up then. Thanks