Case cx90


This is the tank upside down. If you zoom in on the photo you can see metal inserts in the pipes. The two either side go into your brake cylinders,the one in the middle is the outlet pipe and the metal insert sticks up into the tank so the level is kept up. Over time the metal pipe can slip down and it drops the level too low for the cylinders. The tank should be about 2/3 full normally. If it has enough oil the problem is elsewhere.
No leak as such. Bit damp below brake peddles in cab. I'm going to put it back together, put some more oil in it as its a bit low and see how we go.
Thanks for your help
Damp under the pedals could be the cylinders leaking oil out and air back in which would make the pedals soft. Good luck anyway 👍

Latest Poll on TFF

  • Yes

    Votes: 22 14.9%
  • No

    Votes: 126 85.1%

JCB launches Fastrac ‘iCon’

  • 158
  • 0
Written by Charlotte Cunningham from CPM Magazine

JCB has launched new Fastrac 4000 and 8000 Series tractors with an all-new electronics infrastructure which is claimed to deliver higher levels of performance. According to JCB, the new Fastrac iCon operator environment has three key features: iConfigure – creating a bespoke control experience for every operator iConnect – integrating advanced precision agriculture technology iControl – redefining operation through new driveline software The 175hp to 348hp (133kW to 260kW) Fastracs feature the new iCon armrest console and touch-screen display to provide flexibility in operator allocation and operator information, as well as a new transmission control strategy to enhance operator comfort and powertrain efficiency, says the manufacturer...