Case Multicontroller handle dismantling?

[Blue.]

Can anyone tell me how to get inside one?

This type,on a cvx.

Had a good look and cannot find any screws.

 

[Michael3112]

When i asked this about NH one was told by the mechanic they dont come apart Fair chance case will be the same

 

[Sheep]

How soon do you need to find out? I can probably try a scrap one next week.

 

[deleted user 837354]

Worth asking David King Electronics?

 

[Chae1]

Hammer!?

 

[smithy]

Can anyone tell me how to get inside one?

This type,on a cvx.

Had a good look and cannot find any screws.

They are under the rubber pieces where your hand rests.

 

[kill]

Hammer!?

And two pry bars and anything will move!!!

 

[colhonk]

Up button?

 

[Blue.]

Nothing wrong I just want to pinch a wire off the hms button.

 

[Corey]

Can anyone tell me how to get inside one?

This type,on a cvx.

Had a good look and cannot find any screws.

You need to pull the ruber off screws are under there

 

[colhonk]

The thing I have at the mo (Puma 150cvx) is annoying, the longer I was using it to sow, the less the hydraulics UP button worked first time,Blady nusiance when heading for the hedge and need to turn round. The last one was similar but not as bad. Is this a common fault with the multi controlers ?

 

[mo!]

The thing I have at the mo (Puma 150cvx) is annoying, the longer I was using it to sow, the less the hydraulics UP button worked first time,Blady nusiance when heading for the hedge and need to turn round. The last one was similar but not as bad. Is this a common fault with the multi controlers ?

New holland version is the same. I had a new controller on under warranty but it's just the same. The forward
/reverse button does it too, why they use these non serviceable blister buttons is beyond me.

 

[deleted user 837354]

New holland version is the same. I had a new controller on under warranty but it's just the same. The forward
/reverse button does it too, why they use these non serviceable blister buttons is beyond me.

Wouldn't be so bad if the entire stick was say £90 and you could just change the whole thing when it was forked.

 

[Cab-over Pete]

I’ll bet the rubber bits are £90 themselves!!