Case MX170. Need help to find out what does this switch do.

[Edukins]

I need help to find out what this switch on console is for?

https://imgur.com/a/wmUfRZo

 

[feilding]

Wheel slip I think, linked to draft control. Most make of tractors have it.

 

[Edukins]

Wheel slip I think, linked to draft control. Most make of tractors have it.

Thing is I started to have issues with rear hydraulics. It didn’t lift plough but after switching this it did lift twice and again nothing… probably there’s issues with electronics

 

[Alwaysinit]

It looks like the soft ride for carrying implements on the rear hydraulics? Im not sure though.

 

[Zebbedee]

Pretty sure that switch is for “ride control” eg suspension of heavy load on lift arms sorta like soft ride on a loader but very rarely works

 

[Right-arm fast]

It looks like the soft ride for carrying implements on the rear hydraulics? Im not sure though.

This is what it is

 

[ARW]

On my old Mx it’s was to lift the linkage high enough to release the pick up hitch

 

[Gerbert]

On my old Mx it’s was to lift the linkage high enough to release the pick up hitch

That would actually make sense regarding suspension then, the hitch would need to drop a little to make room for going up and down a bit to have suspension. So you might've been switching it off.

 

[ARW]

That would actually make sense regarding suspension then, the hitch would need to drop a little to make room for going up and down a bit to have suspension. So you might've been switching it off.

I don’t know
The linkage didn’t go all the way to the top with the dial so you have to hold down the green button and it pumps the arms to the top, then pull the PUH cable and let go of the green button then you can lower the PUH. I don’t think the button did anything else