Case puma 195 gearbox trouble

Pwk

New Member
Hello iv a 2008 puma. Seems to be goin OK. But when on the road and changing from 18th to 19th it goes into neutral.. Tried calibrating and. Error code u36 comes up...can any 1 shed a bit of light
 

cosmagedon

Member
Location
North Wales
U36 -
Max allowed clutch calibration value
exceeded
1) Current value exceeded without lugging the engine down.
Possible PWM valve faulty or a low hydraulic pressure fault
 

cosmagedon

Member
Location
North Wales
I've just remembered there's also a dump coil on the 50k valve block to make sure it's not dragging when your in any other gear, this could be sticking and dumping pressure out of the pack.
 

Pwk

New Member
I've just remembered there's also a dump coil on the 50k valve block to make sure it's not dragging when your in any other gear, this could be sticking and dumping pressure out of the pack.
Cheers lad. Ploughing with it at the minute. Just when I was moving fields der it kept goin into neutral. Wood it be OK ya think to finish out to day.. I don't nó much about the cases or nh., 😅
 

SILVERLADY

Member
Mixed Farmer
Oh dear if front bearing gone does whine for a while but big job if has tractor will be in alot of pieces if no whine when was going might be something else
 
Tags
puma

SFI - What % were you taking out of production?

  • 0 %

    Votes: 78 42.9%
  • Up to 25%

    Votes: 63 34.6%
  • 25-50%

    Votes: 30 16.5%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 5 2.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top