Cattle crush weigh cells

[Party Pete]

What’s the thoughts on the best brand of weighcells ? Gallagher or Tru-test ? Done a fair bit with Tru test stuff they are ok but not perfect ! No experience with Gallagher at all .

 

[casper74]

I have Tru-test no problems with them...........Yet!!

 

[Bury the Trash]

Tepari 4 t ones are a cut above them 2 .
and cheaper , or at least no dearer anyway.

 

[Party Pete]

Tepari 4 t ones are a cut above them 2 .
and cheaper , or at least no dearer anyway.

Never heard of them ? Are you using them quite frequently?

 

[Bury the Trash]

Never heard of them ? Are you using them quite frequently?

no i havnt got trhem but they look good on paper.

we do have Trutest and Gallagher 'suspended ' ones as it happens theyre fine so far.
and a set of 3t weighbars from 'allied weighing' whatever make they are , they are HD i know that much no plastic bits on them etc.had them a few yrs now ,

 

[davidroberts30]

@Allied Weighing

 

[Bucks Boy]

Crush needed a new floor. Fitted an Allied ally weigh platform. Did two jobs in one. Seems good. Works well.

 

[Bullring]

I was offered tepari when I bought some on the grant scheme but in the end I chose what I was use to and went trutest hd5t. The tepari were slightly cheaper but it was the unknown if they needed repairing.

 

[The Son]

Don't discount Pharmweigh, especially if they are a retrofit to an existing crush, speak to Victor.
I have had the bars for probably 15 years now, a couple of times they have stopped working, and all you do is put them on a pallet, send them back and they refurbish them.