6354 is on a master spline take the adaptor plate with it if you know what i mean
Hi mate!
It’s sat on two triangle plates? 3 studs! Do you mean undo the bottom plate and remove?
Regards[/Q
remove the pump only not the adapter plate. by that i mean the three 5/16" unf nuts on the slotted holes at the base of the pump. there should be a mark scratched between the pump base and the adapter plate to line up when you refit it
looks like a 1200 jake ? been buying
Scrape the paint off below the nut in the picture holding the pump to the plate. There should be a mark on the pump and on the adapter plate. If not make marks. Leave the adapter plate on the engine