Chafer Mirage s/p sprayer hyd oil filling

[farmer phil]

Does anyone have any idea on an easy fill method of hyd oil in the mirage sprayer. Had a couple of pipes go over the years and it could do with some in but the only way I can see is either through the breather which is sooooo slow, or take all the screws out on the top of the tank. Not quick or easy either way

 

[Adeptandy]

No help, but mines got a fillet breather, still slow, but I put the barrel in the teleporter bucket and pump it in with a hose on the barrel pump

 

[Adeptandy]

Opposite problem here, can’t work out where to let it out without pulling a pipe ?

 

[yellow belly]

On a Housham It is Hand pumped in via a connector on the return filter
fit a conector and do it that way

 

[Hjwise]

My Mirage also has a filler on the top plate. Unscrew it this time and weld a fitting on whilst you got it off?

 

[Will 1594]

On a Housham It is Hand pumped in via a connector on the return filter
fit a conector and do it that way

It’s pumps the oil through the filters . And into tank eliminate any potential crap going into tank , ?

 

[Mr Happy]

Does anyone have any idea on an easy fill method of hyd oil in the mirage sprayer. Had a couple of pipes go over the years and it could do with some in but the only way I can see is either through the breather which is sooooo slow, or take all the screws out on the top of the tank. Not quick or easy either way

Remove tank lid and fit a filler breather cap, should improve things no end.

 

[Mr Happy]

Should have attached this to my post