Claas celtis 446 gearbox HELP!!

[eomachinery]

Hi all we have a claas celtis 446 rx, just had it split to put a clutch in and now when selecting high dual power the engine is pulled down as if it's under load, could this be due to something needing bled, or is there an issues with the clutch.

Drives fine in low dual power. Any Info much appreciated

 

[Speedstar]

Its a common problem on them there is a thrust washer that holds the clutch pack in place that works the half gear that fails & its not cheap job to fix & if its been ran for while with the clutch pack slipping , it may need a new gearbox casting

 

[eomachinery]

Its a common problem on them there is a thrust washer that holds the clutch pack in place that works the half gear that fails & its not cheap job to fix & if its been ran for while with the clutch pack slipping , it may need a new gearbox casting

Hi there thanks for your reply, I have since sorted that issue, however I'm now getting the transmission diag light flashing what I believe to be an error code, all functions seem okay. Do you know what it may be? It's on from key on so I assume just electrical.
Many thanks.

 

[eomachinery]

Hi there thanks for your reply, I have since sorted that issue, however I'm now getting the transmission diag light flashing what I believe to be an error code, all functions seem okay. Do you know what it may be? It's on from key on so I assume just electrical.
Many thanks.

Sorry won't let me upload video,

Seems to be l,

5 slow flashes, 6 slow flashes then 1 quick flashes If that makes sense, thanks!