Claas gps
- Thread starter Subaru
- Start date
- Location
- West Wales
- Location
- Essex/Herts Border
Did you mean to mean to tag Rob, if I'm correct he used to work with Topcon kit not Claas kit and is now MD of Sulky UK? That said @Subaru doesn't specify what brand of precision farming kit he is using.
- Location
- West Wales
Yes I did mean to tag Rob, I would be very surprised if he hadn’t come across the system/problem, any help is better than no help
Hi Andy
It is a Claas system on a 13 year tractor. S10 screen.
When cultivating check chains are loose.
Trailed spraying they are tight with steering drawbar. I did wonder if it gets a little bit off line then tries to over compensate to get the sprayer back on track.
The controller is bolted down and recalibrated two weeks ago and all the boxes are ticked.
RTK Farming put in the sim receiver.
It is a Claas system on a 13 year tractor. S10 screen.
When cultivating check chains are loose.
Trailed spraying they are tight with steering drawbar. I did wonder if it gets a little bit off line then tries to over compensate to get the sprayer back on track.
The controller is bolted down and recalibrated two weeks ago and all the boxes are ticked.
RTK Farming put in the sim receiver.
Morning gents,Yes I did mean to tag Rob, I would be very surprised if he hadn’t come across the system/problem, any help is better than no help
Sorry but i have no claas experience at all. They were very few and far between in my day. General rule of thumb:
If it was fine then suddelny got worse its either:
a) soil conditions so it will need re tuning to conditions.
b) hard ware failure,
I've always found claas GPS systems to be very poor in all honesty. Had them calibrated and updated etc and never seems to improve.
- Location
- Wiltshire
I’m no expert but have just had to replace the SIM card on my system (not claas) because the card was looking for a network that no longer supplies data for rtk. It may well be something simple like that
Bg
Bg
Farmerdunk
Member
- Location
- Hertfordshire
Claas Gps Guy is coming out to me when I use it again. Just had tractor 2 years, came with the s10 screen and RTK already fitted. Was demo tractor. Since I’ve had it, it’s been hit and miss. Ok for cultivating work, but wouldn’t trust it with the drill yet. Sometimes if I stop for lunch, go back and it won’t match up again. Or even, finish a field, go straight in to the next one and it won’t pick up any sort of signal, which is very annoying!
And like you said, it takes time to restart, mine takes 3/5 minutes. Hopefully a calibration will sort it.
Farmerdunk
Member
- Location
- Hertfordshire
Hi
Yes it has dual sim.
I have just had the latest updates on the screen and box. As I had purchased the tractor secondhand I did not realise no updates had been done for 6 years!
Let's see how it performs when I go spraying later today.
Do you know what update version you had?
Farmerdunk
Member
- Location
- Hertfordshire
Mine is 4.00.04. Needs updating then!
A long time since I looked at this thread.
The upgrade did not cure the problem but the Claas demo man came out and we fitted a new receiver on the roof which might have been easy if the bolts had not turned without coming undone
, but we got there in the end. I have been drilling this autumn and it is now very accurate. The cost of the receiver was approx. £280 so not too bad, no call out costs either.
The upgrade did not cure the problem but the Claas demo man came out and we fitted a new receiver on the roof which might have been easy if the bolts had not turned without coming undone
, but we got there in the end. I have been drilling this autumn and it is now very accurate. The cost of the receiver was approx. £280 so not too bad, no call out costs either.