- Location
- S.E
Does anyone know if a claas S10 screen will operate a trimble easy pilot or e steer system? Also can an S10 be made to run off of a trimble RTK base station?
Claas S10 and Trimble
- Thread starter Against_the_grain
- Start date
Pheasant Surprise
Member
- Location
- Woodbridge, Suffolk
You need to found out / check what correction format the Trimble base is sending.
If it’s the typical sCMRx then your pretty well scuppered. If it’s RTCM (or possibly one of the non scrambled CMR+) then it should work. More or less definitely compatible with RTCM outputs though I’d say as a Trimble Ag bass it’s unlikely to be sending that out
If it’s the typical sCMRx then your pretty well scuppered. If it’s RTCM (or possibly one of the non scrambled CMR+) then it should work. More or less definitely compatible with RTCM outputs though I’d say as a Trimble Ag bass it’s unlikely to be sending that out
- Location
- S.E
Its an RTK farming base @RTK Farmer
If it’s an rtk farming base you are restricted to Trimble only equipment as the base sends out an encrypted signal and the Trimble receiver decrypts it.
We have all the are rtk farming do covered with our own non encrypted signal.
Pm me for me details as I’m sure we can help
We have all the are rtk farming do covered with our own non encrypted signal.
Pm me for me details as I’m sure we can help
- Location
- East Sussex
They might have misled me but I asked this at lamma as we’ve a 620 demo in the pipe line, he said it would work as we also have a RTK farming station. What he might of misunderstood is that I want to put my 372 that already has the radio fitted to it, on the claas.